Water treatment Equipment > Zl-cl001 ultrafiltration water treatment filtration equipment
Ultrafiltration water treatment filtration equipment
Equipment basic configuration:
Name: ultrafiltration water treatment filtration equipment
Use occasions: large
Rated frequency: (50 Hz)
Rated power: 10 (w)
Feed water pressure: 0.4 (Mpa)
Water supply: 15000 (L/h)
Net content (specifications), 1000 (kg)
Quality features: 0.2 (M omega - CM)
Voltage: 380 (V)
Applicable objects: liquid
Principle: the pressure filtration
Ultrafiltration is a pressurized membrane separation technology, namely under certain pressure, make a small molecule solute and solvent through a certain aperture of a special film, and make the solute molecules cannot pass, stay in the film, which results the macromolecular material part of the purification.The device with large molecules and small molecules apart, intermediate fiber ultrafilter, with the high density of unit container filling, cover an area of an area small, etc.
Ultrafiltration technology has the advantage of simple operation, low cost, no need to add any chemical reagent, especially the ultrafiltration technology condition of experiment, mild compared with evaporation, freeze drying, no phase change, and is not caused by temperature, PH value change and thus can prevent the degeneration of biological macromolecules, inactivation and autolysis.
Ultrafiltration equipment is mainly applied to the production of ultrapure water, food and beverage industry, fermentation industry, pharmaceutical industry, etc.
Use and maintenance: ultrafiltration equipment such as suspended (less than 10 days) to deal with when using ultrafiltration membrane backwash time, sterilization in backwash water in 15 PPM of 30 PPM or hydrogen peroxide or sodium hypochlorite in backwash water after 10-15 PPM residual chlorine dosing of ultrafiltration membrane fill valve, drain valve and control valve closed, sealing and sterilization effect to keep on ultrafiltration membrane.Such as stop using for a long time (more than 10 days), sterilization of ultrafiltration membrane backwash first time, and then in the ultrafiltration kept sealed after injection protection fluid.
1.Surface is smooth and dense, the average aperture 0.01 mu m or so, support layer to spongy structure;So the pressure, pollution resistance, pressure resistance, long service life, good water quality and water production.
2.Empty fiber surface activation layer porosity is high, has a bigger flux.
3.Empty fiber strength is good, can use reverse flushing and washing process, greatly extend the components of chemical cleaning cycle.
4.Handling of different objects, ultrafiltration series products of choose to use the modified polysulfone, different materials, such as modified polyether sulfone, PVDF has good tensile strength and oxidation resistance, the precision of its separation from 0.01 micron to 0.20 microns, is suitable for the processing of more complex system
Areas of application:
Is mainly used in electronics, medicine, food and other industries in the pure water, high pure water preparation, for the purpose of separation, enrichment and purification process;Mineral water, drinking water purification, aseptic etc. Various kinds of production process.According to the needs of customers, can from different water for life and industrial use a variety of water treatment systems, including drinking purified water, soften water, pure water, high pure water and pyrogen in medicine, pure water system.Also provide water treatment system of a variety of supporting services.